- 13 -
ENGLISH
• Insert about 1 metre of the arm in the holder
• Give the “START” command to position the arm
holder horizontally
• Pull the arm down to help the reducer counteract the
force of the pre-calibrated spring
2.5 ALIGN THE ARM
“
START
”
Install the arm and adjust the holder
Adjustable arm holder
Electrically connect the control unit (see point 2.8)
USE THE ADJUSTABLE ARM HOLDER TO
ALIGN THE ARM WITH THE ROAD.
2 x 17mm
Check that the bar is
in horizontal position
2.4 INSTALL THE ARM
M6x10
M6x10
M10x25
M8
M6x16
M6x16
Ø10
Ø8
Ø6
Ø6
Ø16
Ø16
Ø10
Ø6x16
M16x100
M16
M10
TIGHTEN 210Nm
M8x20
Ø8
2. Installation
EN