8
EPIC 2-manual-EN-v1.2 April 2022
Pre-flight inspection
Your paraglider is designed to be simple to inspect and maintain but a thorough pre-flight procedure is mandatory on
all aircraft. The following pre-flight inspection procedure should be carried out before each flight.
1. Whilst opening the paraglider check the outside of the canopy for any tears where it could have been caught
on a sharp object or even have been damaged whilst in its bag. Visually inspect the risers for any signs of
damage.
2. Check the lines for signs of damage, twists or knots. Divide the suspension lines into groups, each group
coming from one riser. By starting from the harness and running towards the canopy remove any tangles or
twists in the lines. Partially inflating the canopy in the wind will help to sort out the lines.
3. Ensure the brakes are clear and free to move. Check the knot which attaches the brake handles to the brake
lines. Avoid having too many knots, as there is a risk the knots could become stuck in the brake pulleys. Both
brakes should be the same length and this can be checked by having an assistant hold the upper end of the
brake lines together whilst you hold the brake handles. The brake lines should be just slack with the wing
inflated when the brakes are not applied.
4. Always check the buckles and attachments on the harness. Ensure the two main attachment maillons/
karabiners from the harness to the main risers, and the individual shackles which attach the risers to the lines,
are tightly done up.
5. Before getting in to the harness you should be wearing a good helmet. Check the parachute container is
correctly closed and the handle is secure. Put on the harness ensuring all the buckles are fastened and that it
is well adjusted for comfort.
Your paraglider is now ready for flight.
Preparation
