SW-Stahl und Werkzeugvertriebs GmbH
Tel. +49 (0) 2191 / 46438-0
F
5
6
e
s
s
a
r
t
S
r
e
s
u
k
r
e
v
e
L
ax +49 (0) 2191 / 46438-40
e
d
.l
h
a
t
s
w
s
@
o
f
n
i
:l
i
a
M
-
E
d
i
e
h
c
s
m
e
R
7
9
8
2
4
-
D
Instruction Manual
BGS technic KG
Bandwirkerstr. 3
42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Art. 3204
Air Spray Gun
SAFETY INFORMATION
Please read this manual thoroughly before using the Air Spray Gun and store in a safe place for quick
and easy reference at all times. Incorrect use of this device can cause serious injuries. To be used
only by qualified personnel. You must observe the following points in the interest of your own safety!!!
•
The Air Spray Gun causes considerable noise pressure. Please wear hearing protection in order
to avoid noise which can be damaging to your health.
•
When working with the Air Spray Gun, small parts may be whirled into the air: Wear protective
goggles to prevent eye injuries. Also take care that the people around you are sufficiently
protected.
•
Only use the Air Spray Gun in ventilated spaces.
•
Never operate the Twister with more than 6 bar.
•
Do not use liquids which are acidic, alkali and/or inflammable.
•
When using cleaning fluids which need to be diluted, always strictly observe the manufacturer's
instructions to make sure the mixture is correct.
•
The Air Spray Gun nebulises the cleaning liquid very finely. To prevent health hazards from
inhalation, wear appropriate respiratory protection.
•
Never point the Twister towards the face or body.
•
When your Air Spray Gun doesn't work anymore, turn of the device immediately and take it to a
qualified service engineer.
•
Before you replace parts, cut off the connection to the compressed air supply, so you accidently
don't set the Air Spray Gun to work.
•
Keep the Air Spray Gun out of the reach of children.
INSTRUCTIONS
1. Remove the container and fill it with the liquid.
2. Connect the Air Spray Gun to a compressor. Check the condition of the couplings and hose
before using the Twister.
3. Press the "trigger" all the way; move the Air Spray Gun slowly in circular motions over the surface.
CARE AND MAINTENANCE
Clean the Air Spray Gun after each usage.
CAUTION:
Constant air rates vary depending on the size and power of the compressor.
Always make sure that the tank and the air hoses are free from impurities of any kind.
TECNICAL DATA
Working Pressure:
3 – 6 bar
Air Consumption:
130 – 260 l/min
Nozzle Pipe Length:
220 mm
Container Capacity :
1000 ml
Noise:
LpA = 92 dB(A)
LwA = 103 dB(A)
