BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
BGS 70209
Cordless Screwdriver
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-compliance
of the safety instructions may lead to damage, personal injury and to termination of the warranty. Keep
these instructions in a safe and dry location for future reference. Enclose the operating instructions when
handing over the product to third parties
.
INTENDED USE
This cordless screwdriver is used to tighten or remove screw connections with the aid of the accessories
supplied. Do not use this tool for any other purpose.
GENERAL SAFETY INFORMATIONS
Please read all safety precautions carefully before use.
•
Do not leave wrapping material and plastic foil carelessly around. Plastic bags etc. can become a
dangerous toy for children.
•
Keep this product out of the reach of children. It is not a toy and is not suitable for children.
•
Keep the work area clean and well-lit. Overcrowded or dark areas lead to accidents.
•
Do not operate power tools in potentially explosive areas, e.g. B. in the presence of flammable
liquids, gases or dust. Power tools generate sparks that can ignite dust or fumes.
•
Keep children and bystanders away while you are operating a power tool. Distractions can make you
lose control.
•
Do not use the product if it is damaged or in any way malfunctioning and do not attempt to repair it
yourself.
ELECTRICAL SAFETY INFORMATIONS
•
The power tool plugs must match the outlet. Never change the plug in any way. Do not use adapter
plugs with grounded power tools.
•
Do not expose power tools to rain or moisture. Water getting into a power tool will damage the tool
and increase the risk of electric shock.
•
Do not abuse the cable. Never use the cord to carry, pull, or pull out the power tool. Keep the cord
away from heat, oil, sharp edges, or moving parts.
•
When operating a power tool outdoors, use an extension cord that is suitable for outdoor use.
•
If operating a power tool in a damp location is unavoidable, use a supply protected by a residual
current device (RCD).
•
Only plug a charger into a properly secured socket.
•
Do not use the charging accessory if the connection cable or plug is damaged.
•
Failure to observe can result in electric shock and fire.
TECHNICAL DATA
Drive profile: Internal hexagon
Drive size: 6.3 mm (1/4")
Free speed: 300 rpm
Max. Torque: 2.8 - 3 Nm
Max. Manual Torque: 10 Nm
Torque steps: 5
Battery: 1.5 Ah Lithium
Charging time: 3 - 5 hours
Weight (Screwdriver): approx. 250 g
Dimensions: 175 x 37 x 35 mm
Storage temperature: 0 - 50 C°
