SW-Stahl und Werkzeugvertriebs GmbH
Tel. +49 (0) 2191 / 46438-0
F
5 6
e s s a r t S r e s u k r e v e L
ax +49 (0) 2191 / 46438-40
e d . l h a t s w s
@
o f n i : l i a
M - E
d i e h c s
m
e R 7 9 8 2 4 - D
Instruction Manual
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
BGS 9667
Air Impact Wrench
INTENDED USE
This air device is used to tighten and loosen screw connections. The impact wrench is only allowed to
operate with tools that are specially designed for use on impact wrenches.
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-compliance
of the safety instructions may lead to damage, personal injury and to termination of the warranty. Keep
these instructions in a safe and dry location for future reference. Enclose the operating instructions when
handing over the product to third parties.
SAFETY INFORMATIONS
When using pneumatic tools, fundamental precautionary measures must always be ensured in order to
reduce the risk of personal injury and property damage.
•
Keep children and unauthorised persons away from the work area.
•
Do not let any children play with the tool or its packaging.
•
Make sure that the work area is sufficiently illuminated.
•
Keep the work area clean, organised, dry and free from other materials.
•
Do allow untrained persons work with this tool set.
•
Ensure that the trigger is located in the OFF position when being connected to the compressed air
system.
•
Do not carry out any modifications on the tool.
•
Use only accessories that are dimensioned for use with compressed air tools, e.g. with impact
wrenches, for manual use do not use conventional sockets, use only power sockets.
•
Disconnect the tool from the compressed air supply before installing accessories, when carrying out
maintenance work or the device is not being used.
•
Maintain the tool with care. Check hoses and compressed air connections at regular intervals.
•
Do not use the tool if it is damaged. Have the tool repaired by specialist personnel.
•
When installing regulators, filters and other accessories, observe the manufacturer specifications of
the compressed air system.
•
Store the tool in a dry and safe location out of the reach of children.
TECHNICAL DATA
Max. drive speed: 8500 rpm
Output profile: external square
Drive profile size, metric: 12.5 mm
Drive profile size, imperial: 1/2"
Min. working torque: 450 Nm
Max. working torque: 610 Nm
Max. loosening torque: 630 Nm
Sound pressure level (LpA): 94.6 dB(A)
Sound power level (LwA): 105.6 dB(A)
Vibration level: ahd=5.99 m/s² / K=1.1 m/s²
Operating pressure: 6.2 bar (90 psi)
Air consumption: 142 l/min
Air inlet: 1/4"
Hose diameter: 10 mm (3/8”) recommended
Length: 112 mm / 92 mm (without outer square)
Weight: 1.45 kg
