SW-Stahl und Werkzeugvertriebs GmbH
Tel. +49 (0) 2191 / 46438-0
F
5 6
e s s a r t S r e s u k r e v e L
ax +49 (0) 2191 / 46438-40
e d . l h a t s w s
@
o f n i : l i a
M - E
d i e h c s
m
e R 7 9 8 2 4 - D
Instruction Manual
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
FITTING-INSTRUCTIONS
1. Attention
: Observe the fitting position of the
bushing.
Note
: Rubber studs on the bushings point
to 12 o'clock
2.
Insert the retaining - pressure-plate Ø 74 mm with
collar towards the bearing
3.
For the fitting, position the tools with the bushing in
this sequence from the left before the bearing block
of the bracket (studs in the recess on the special
pressure piece Ø 74 mm)
4.
Attach the retaining - pressure-plate with inserted
conical nut from the right and rotate the spindle
5.
By countering the spindle rotation and screwing on
of the conical nut, the plastic bushing is now
pressed into the bracket spacing
