14
Before handling, moving or transporting the splitter:
1. make sure to cut the power off (unplug the machine).
2. slide the ram down and to tie up the two control handles together
to prevent them from swinging out and accidentally injure/damage
persons or other equipment standing nearby.
3. leaned the splitter back on the wheels while firmly holding it with
one hand on the rear upper grip and the other hand on the cover pla-
te above the motor. (Fig. 5)
6. HANDLING AND TRANSPORTATION
Fig. 5
5.10 About the gasoline engine
Before starting your machine, make sure that a visual control of the
engine conditions is successfully performed.
Check the level of the feuel and of the lubrication oil in the tank (using
the special motor gauges) andmake sure there are no visible mechanical
defects or damages on the engine and on the machine.
To avoid damaging your splitter and/or the engine, take some time to
carefully read the attached HONDA POWER PRODUCTS instructions and
to make yourself familiar with all tips and instructions given therein.
The engine manufacturer’s manual contains useful information about
safe and correct start-up, use, service, transport and troubleshooting
procedures as well as all technical data and specifications of the engine.
Summary of Contents for HS 80-2 B
Page 27: ...27...
