15
7. 4-WAYS WEDGE AND
SPLAY-WEDGE (ACCESSORIES)
Fig. 6
On request, the log splitter can be factory equipped with a 4-ways
wedge and/or a splay wedge.
The 4-ways wedge is designed for splitting each log in 4 sticks in one cycle.
The splay wedge can be used for cleaving big, hardwood logs and
facilitates breaking through the log.
4-ways wedge and splay wedge are simply slipped on the permanent
wedge of the machine and secured by means of a special star knob.
BEFORE STARTING THE CYCLE make sure that wedge is fully
slipped-on the permanent wedge and secured in position with
the star knob.
Before strating the cycle make sure that wedge is fully slipped-on
the permanent wedge and secured in position with the blade wings
facing the operator side.
Do not work with a loosened wedge to avoid falling off during split-
ting!! This is a very UNSAFE method and could result in major injuries
to the operator and permanent machine damages.
Preferably avoid using a 4-way wedge for splitting of hard wood (fruit
trees, beech etc...) likely of imparting excessive pressure against the
wedge.
When using a 4-ways wedge the log clamps on the control
handles must be pulled out of the splitting area below wedge.
4-way wedge
Splay wedge
Summary of Contents for HS 80-2 B
Page 27: ...27...