9
Strictly perform installation, set-up, maintenance, cleaning
and transportation with the motor switched off and the machi-
ne firmly secured against accidental operation. Immediately
disconnect power off the machine in case of any eventual fault
or trouble.
Users shall strictly comply with these operation, set-up, maintenance,
repair and trouble-shooting instructions in order to assure safe ope-
ration and no damages to the equipment. Moreover we recommend
to let the machine be run only and strictly by trained and skilled staff
who must be familiar with the applicable occupational safety and
health administration rules as well as applicable transportation rules.
Incorrect use of the saw can cause serious injury or death.
No person under school leaving age should operate a log splitting ma-
chine. Those who have reached school leaving age but are below the
age of 18 may operate a circular saw if supervised by a competent
person of 18 years or over. The machine shall be installed and kept in
a suitable location selected by the customer for safest operation.
Machine instability can result in injury or severe damages. To ensu-
re stability during operation make sure to choose a flat, dry floor free
from any tall grass, brush or other interferences. The working area
around the machine must be kept as clear as possible from surroun-
ding tripping obstacles and slippery foundation floors should be duly
treated (do not use saw dust or wood ash for this purpose).
Make sure that the equipment stands on a safe stable foundation.
● Due and proper illumination of the working site must be provided at all times.
● Ensure that a wide but confined area is available around the machine
and assure maximum working freedom
● A skilled licensed electrician must be asked for any repair of the electric system
● Operators must wear steel toe safety shoes and snug-fitting tear resistant
work cloths
● No additional customised protections or tools should be provided on board of
the machine, other than the ones designed and supplied by the manufacturer
● NEVER leave the machine unattended with the running motor
Compliance to the applicable occupational safety and health administration
rules as well as applicable transportation rules must be assured at all times.
Operator‘s hearing protection, safety glasses, safety shoes and
gloves, close fitting cloths and other adequate protection means are
strongly recommended. Make sure that all access ways are properly
maintained so that wood can be safely delivered, loaded and shipped.
4. SAFETY
