EN
USER MANUAL EASYGO / EVO / NITRO / AWD / ATOM
38
4.
Turning the Bicycle Lights and the Backlighting of the Display Panel On and Off.
Holding down the (-) button for 3 seconds will turn the backlighting of the display panel on and off.
The lights will also be switched on and off in those models equipped with a battery-powered light system.
At this moment, the lights on indicator will appear on the screen:
3 sec
5.
Selecting Information on the Screen.
The display panel's screen allows the user to view various useful information. The information on the
screen changes when you press the POWER button:
1. Total distance (km).
2. Total time (hh:mm).
3. Average total speed (km/h).
4. Trip distance (km).
5. Trip time (hh:mm).
6. Average trip speed (km/h).
7. Range (TO GO km).
When starting a new journey that you want to measure, you must reset the trip information to zero,
by holding down the ON/OFF and (-) buttons at the same time for 3 seconds.
3 sec
NOTE
The range is calculated based on the riding conditions during the last
kilometre and the remaining capacity of the battery.
6.
Battery Level Indicator.
The battery level indicator shows the estimated remaining battery capacity on a 5-segment scale,
as shown in the image below:
Summary of Contents for ATOM
Page 2: ......
