H-916 SB2 Indoor Cycle
10
ELECTRONIC MONITOR
TROUBLESHOOTING GUIDE
Problem:
The display comes on but only the Time function works.
Solution
:
a. Make sure that the connection cable is connected.
Problem:
The display does not come on or the displayed segments are very weak.
Solution
:
a. Check that the batteries are fitted correctly.
b. Check the battery charge
c. If they are run down change them immediately.
Problem:
Display segments of a function read-out are not visible or error messages for a particular function
appear.
Solution
:
a. Remove the batteries for 15 seconds and then refit them correctly.
b. Check the battery charge. If they are run down change the batteries.
c. If the above steps do not help then replace the electronic monitor.
Avoid leaving the electronic monitor in direct sunlight as this might damage the liquid crystal display. Similarly, do
not expose it to water or knocks.
