15
STEP 3
Slide the seat post (41) into the seat
tube on the frame. Attach the seat (1)
into seat slider (40). Insert the seat slider
(40) to the seat post (41) and secure it
in place with the lever (4A). Use lever
(4B) to make seat height adjustments.
STEP 4
Attach the pedals (11) into the crank
arms (5)(7), each pedal is marked with
L (left) or R (right) to denote the side
of the bike they are on. Note - the right
hand crank is on the same side as the
chain guard (6).Take good care when
aligning the threads to avoid damaging
them. Applying some grease on the
threads will help the pedals and cranks
to mate correctly and easily. Tighten
using a 15mm wrench; both pedals
should be tightened toward the front
of the bike. Attach the water bottle
holder (29) to the frame. Then attach
the console (28) to the holder on the
handlebar slider.
4A
4B
Summary of Contents for SB4 -
Page 4: ...4 WARNINGS AND LABELS...
Page 19: ...19 CONSOLE OVERVIEW...
