SK9900RTV
Page 24
CONSOLE OPERATION
PROFILE, Aerobic State PROGRAM
Screen 2 Screen 12
With the monitor displaying the main
Screen 2, press the profile manager
key and Screen 12 will appear.
Press the Aerobic State program key
and Screen 14 will appear.
To return to the Main Screen 2,
press the STOP key.
Screen 14
Screen 8B
Screen 14 offers three exertion
levels (Weight loss, Intermediate,
Aerobic capacity). Press one of the
keys and Screen 8B will appear.
Select the desired time of the
exercise and press QUICK/START
to begin exercising.
Screen 21 Screen 9
The workout Screen 21
will collect
statistics while exercising.
If the RPM
symbol
appears, then begin to pedal faster.
It means that you are exercising
below the minimum rate at which the
brake controller operates correctly.
If you stop exercising without pressing any key, first the RPM symbol
will appear in 15 seconds.
After approximately thirty seconds, the pause
symbol will appear. Then the Workout Statistics
Screen 9 is displayed for 30 seconds. It lists the values obtained during the exercise session. The monitor
returns to the main Screen 2.
If the user starts to exercise again while the RPM
or pause
symbols appear, then the
monitor returns automatically to the workout Screen 21 and continues to collect statistics.
The unit applies varying resistance forces on the user during the time of the exercise. The Program Graphics
visually show the resistance versus time.
PROGRAM
GRAPHICS Aerobic
Weight loss Intermediate Aerobic capacity
You can vary the exertion level during the exercise in any of these programs by pressing the
level
▲
-
level
▼
keys.