SK
SK
SK
SK
LINE
G799TVC
sportkoncept
16
FAULT FINDING CHART
PROBLEM
CHECKS
SOLUTIONS
1. The monitor does
not switch on.
1) Make sure that the machine is
plugged in, the ON/OFF switch in
position I and that the safety key is
inserted.
1) Plug the machine into the
mains supply.
Set the switch to position I and
insert the safety key.
2. The monitor
switches on but the
motor fails to start.
2) Check that the current limiter is
pressed in.
1) Switch the machine off and
press the circuit breaker in.
2) Lubricate the treadmill band.
3. Walking motion is
jerky on the treadmill
3.a) Check that the belt is lubricated.
3.b) Check the tension on the sliding
belt.
3.c) Check the tension on the drive
belt.
3.a) Lubricate the sliding belt.
3.b) Adjust the belt tension.
3.c) Adjust the drive belt tension.
4. The machine stops
(the breaker trips)
4) Check that the band is lubricated
1) Reset the overload button with
the On/Off switch at “0” and
lubricate the treadmill band.
5. Electrical shocks
through the handrail.
5) Check that the machine is plugged
into an earthed mains socket.
1) Plug the machine into an
earthed mains socket.
6. The treadmill belt
skews off centre
6.a) Check that the machine is level
on the floor
6.b) Check that the machine does
not wobble.
1) Use the adjustable feet to level
the machine.
Do not hesitate to get touch with the Technical Assistance Service if you have any queries by phoning customer
services (see last page in manual)
