Register your product warranty online at: www.BHFitnessUSA.com
Questions regarding warranty and parts call: 636.634.2217
12
TM
ASSEMBLY INSTRUCTIONS
STEP 3
Please remove the M8xP1.25x20L Screws (H-3) and Flat Washers (H-2) from the underside of
the Slide Rail (H12). Then fit and attach the rear Stabilizer (G) with Slide Rail (H-12) with the
M8xP1.25x20L Screws (H-3) and Flat Washers (H-2).
Remarks: Do not screw one set of the M8xP1.25x20L Screws and Flat Washers too tightly at one
time. It is better to fix the four sets firmly at the same time to allow you to change angles
and to level easily.
STEP 4
1. Please remove the M5x35L Screws (H-11) on the Slide Rail (H-12)
2. Pass the Slide Rail (H-12) through the Slide Seat (H-4)
3. Use the M5x35L Screws (H-11) to fix the Stopper (I-5) on the Slide Rail (H-12).