TIME = 12:00
MODE = P2
INTENSITY = 10
safe and effective
figure shaping
cavitation
12
C h a n g i n g m a s s a g e
intensity
Once you have selected the
desired time and work mode
settings, you can set the last
of the parameters: Intensity.
To do this, press the button
and with the machine on
(a green light appears in the
centre of the unit), you can
use the
+
and
-
keys to
select the intensity level.
The default intensity level is
5 but this can be changed by
selecting from 5, 10,
15,20
and 25.
After pressing the key
it
is not possible to modify the
time setting.
Finally, take hold of the hand unit and push down on the pedal to begin
your cavitation session.
When you tread on the pedal you will see the time countdown on the
screen and the hand unit will begin to emit impulses. Place the hand unit
on the area you wish to work and massage it as shown on the DVD on in
the “Application modes” section.
If you wish to pause the session, just stop pressing on the pedal and the
impulse emission will stop immediately.
