Disinfection, Cleaning and Maintenance
17
Disinfection, Cleaning and Maintenance
Lift Cleaning and Care
WARNING: It is recommended that your
Ministand™ and its accessories are regularly
cleaned and/or disinfected between each patient
use if necessary, or daily as a minimum. If the lift
and/or equipment needs cleaning, or is
suspected of being contaminated, follow the
cleaning and/or disinfection procedures
recommended below, before re-using the
equipment.
For cleaning your lift, equipment and
accessories wipe down with a damp cloth using
warm water to which a disinfectant/cleaner has
been added.
CAUTION: Do not over wet areas of the product
which could cause problems with electrical
components or internal corrosion. If a hot air
dryer is used to dry the lift, the temperature must
not exceed 80°C (176°F.) Do not use petroleum
based solvents or similar, since this may damage
plastic parts.
For disinfection of contaminated lifts, equipment
and accessories, use the preferred method of
wiping the product completely with “hard
surface disinfectant wipes” that are supplied
impregnated with a 70% v/v solution of
Isopropyl Alcohol.
Rub the unit vigorously when using the wipes, to
promote effective disinfection of the surfaces.
The Ministand™ is subject to wear and tear, and
the following actions must be performed when
specified to ensure that the product remains
within its original manufacturing specifications.
BHM Sling Maintenance
For more information about sling maintenance,
please refer to the
Instruction for Use
that comes
with your sling.
