Instruction for Use
28
The acoustic fitting via programming
is carried out directly on the patient.
To do this, mount the hearing system on
the respective wearing option and ensure
that it is correctly fitted on the patient.
Programming interface
Only the programming interfaces NOAHlink
and HI-PRO may be used for the contact
forte hearing system. The programming in-
terface must be installed on your computer.
For installation, please use the program-
ming interface manufacturer’s documents
and software.
contact forte fitting software
The BHMFit contact forte must be used
to fit the hearing system to the patient's
hearing loss. In order to ensure that your
device works smoothly, please use only the
software approved by BHM for this hearing
The programming socket is now visible
at the bottom, where you can connect the
programming cable (Symbolic image 18).
Please make sure that the red marking
on the programming cable connector
is on the same side as the yellow marking
on the programming socket. Otherwise,
you will have no connection i.e. may de-
stroy the programming socket!
Symbolic image 18