43
Instruction for Use
Programming interface
Only the programming interfaces NOAHlink and
HI-PRO may be used for the
contact star evo1
hearing system. The programming interface
must be installed on your computer. For instal-
lation, please use the programming interface
manufacturer's documents and software.
Fitting software
In order to guarantee flawless function, please
only use the BHM software released for this
product. If you have any doubts or queries,
please contact your supplier or BHM.
After programming
Remove the programming cable and close the
protective cover again until it locks into place.
Recommendation:
If you wish to switch off the
volume control function, you can do so by de-
activating it using the fitting software.
Please ensure that the red marking on the
programming cable plug is on the same
side as the yellow marking on the programming
socket. Otherwise, you will have no connection
i.e. may destroy the programming socket!
The acoustic fitting via programming is
carried out directly on the patient. To do
this, mount the hearing system on the specta-
cles and ensure that it is correctly fitted on the
patient.
Symbolic image 7