39
Instruction for Use
Adjustment and
programming
(For hearing care professional only)
The hearing system
pan
is available
as a monaural hearing system. For
binaural support, two monaural devices are
used. The decision regarding which device
should be worn on the left-hand or right-
hand side is made by the hearing care
professional during the fitting.
Before programming
Before programming, please remove the
socket cover (Symbolic image 8).
Use a pair of tweezers to remove the socket
cover. Under the cover, the programming
socket to which the programming cable can
be connected becomes visible (Symbolic
image 9).
way. Slide the telephone receiver near the
microphone, but not directly on it (Symbolic
image 7).
If any acoustic feedback occurs, it may take
a moment for the digital feedback suppresser
to adapt to the hearing system. The acoustic
feedback is also reduced when the distance
between the telephone and the ear is some-
what bigger. According to your requirements,
your hearing care professional can also set up
a special telephone programme.
Symbolic image 7
