background image

21

User Instruction

Battery compartment lock

To prevent babies and children from swallo-
wing the battery the hearing aid includes a 
battery compartment lock. The lock prevents 
the compartment from opening. The battery 
compartment can only be opened with a spe-
cial key tool. Please see the illustrations for 
opening and locking directions.
If the key gets lost the lock can also get un-
locked with the tip of a pen/pencil. Neverthe-
less, we recommend that you contact your 
Hearing Aid Professional for a new key tool.

Pre-set controls

Pre-set controls are placed behind the cover 
on the back of the device. The cover should 
always remain closed to prevent dirt and 
moisture from intruding. If the cover gets 
lost, contact your Hearing Aid Professional.
The pre-set controls will be adjusted by the 
Hearing Aid Professional during your fitting 
session. The setting of the controls is done 
according to the individual characteristics of 
particular hearing loss of the user.

The control settings 

should therefore 

NOT BE CHANGED 

or readjusted 

except by your 

Hearing Aid 

Professional.

Pre-set
controls

 

Key for battery
compartment
lock

Open

Locked

Summary of Contents for Viper 170P














Reviews: