Replacing the fan on a Nexia
This article explains how to replace a fan in a Nexia product. The Nexia has a single fan located on the right side of the
chassis (when viewed from the front). The fan should be replaced if it makes excessive noise (especially grinding or
groaning noises) or if it doesn't spin at all when the unit is powered on.
Replacement fans can be obtained from Biamp Systems, either as a warranty item or a spare part order. However, there
are several different fans available, depending on when the Nexia was manufactured. Please take note of the serial
number of the Nexia and call Biamp's Service department to ensure you receive the correct fan for your Nexia.
Required Tools
The following items are required to replace a Nexia fan:
• #1 Phillips screwdriver
• #2 Phillips screwdriver
• Replacement Fan (call Biamp Service department for correct part number)
Step by step
Follow the steps below to replace the fan. Click on any of the images to see a full-size view of the photo.
1. Unplug power to the Nexia.
2. Remove the Nexia from its rack or enclosure, if necessary.
3. Remove the three #4 sheet metal screws on the front of the chassis.
4. Remove the four #4 sheet metal screws on the rear of the chassis.
Copyright 2013-2020 Biamp Systems
http://support.biamp.com/
1
