page 4
Installation and Operation Guide
TesiraFORTÉ
System Information
The system information screen shows the following information:
• Device audio state (on/off)
• System description
Network Parameters
The network parameters screen shows the following information
• Host name
• IP address
• Subnet mask
• Gateway
Faults
If a fault is present in the system an exclamation icon is shown on the lower right
of the screen. Each unique fault in the system will be listed.
Figure 4.
Faults
Locate
When locate mode is enabled, “Locate” will appear on the OLED screen.
Display Settings
The display settings operations include the following:
Figure 5.
Display Settings
1. Change brightness and contrast
2. Edit timeouts
Edit Timeouts
Allows editing the duration of time allowed to pass before the OLED screen
enters Dim or Sleep mode.
• Dim Mode
The display has a screensaver mode where it will dim the display brightness.
Pressing any button will bring the screen back to the original brightness and
respond to the control movement.
• Sleep Mode
After the display timeout is reached the display will go blank. The device will
still have power in this state even though the display appears blank.
Localization
All menus and error messages are displayed in English by default. Descriptive
icons are used to avoid the need for messages in specific languages. Text
entered (e.g. Device Description) will be displayed in the language as entered
in the software.
The following alphabets are supported:
• Latin-1 (ISO/IEC 8859-1) and Latin-2 (ISO/IEC 8859-2)
• Cyrillic (Russian alphabet only)
• Simplified Chinese
• Japanese – Hiragana, Katakana, Kanji
• Thai
1
2
