40
SIRIO
9.4 Inactivity
If the automatic vending machine remains inactive for a long time
it is necessary to perform some prevention operations:
- disconnect the machine electrically and hydraulically;
- completely empty the instant boiler and the floater reservoir
removing the plug located on the hose along the drain chute.
Put the plug back in once the draining has been done (Fig.
9.9);
- discharge all the products from the containers;
- thoroughly clean all the parts in contact with food substances
according to what has already been described;
- empty the liquid waste bucket and clean it carefully;
- eliminate the waste dregs bag;
- clean all the internal and external surfaces of the machine with
a cloth;
- protect the outside of the machine with a plastic film wrapping
or bag (Fig. 9.10);
- store in a dry and protected place where the temperature is
not less than 1° C.
Fig. 9.9
Fig. 9.10
10.0 DISMANTLING
Proceed to empty both the water and products as described in
the previous paragraph.
For disposal it is advisable to dismantle the machine separating
the parts according to their composition (plastic, metal, etc.).
The parts divided in this way should then be sent to the relative
specialised companies. If a cooling unit is present it should be
consigned to the relative authorized disposal companies without
disassembling it.
Summary of Contents for SIRIO FRESH BREW
Page 2: ......
