2
1. Introduction
Congratulations on your purchase of Bianco Pumpz pump.
Bianco Series 2 offers performance, reliability and dependability.
This manual is for the Jet types Inox (stainless steel) and Ferro (cast iron) pumps as well as
for the PTF (peripheral turbine type) model.
•
Inox:
Corrosion resistant stainless steel housing with reinforced composite internals
•
Ferro:
Cast iron housing with cataphoresis corrosion resistant coating and reinforced
composite internals
The Inox and Ferro pump models are ideal for supplying water to domestic installations and
applications where some suction lift is necessary
•
PTF:
Cast iron housing with cataphoresis corrosion resistant coating and stainless steel
impeller
Bianco Inox and Ferro S2 Jet pumps incorporate an internal venturi enabling water to be
drawn from below ground level. Your pump is equally comfortable pumping from a tank,
boosting low pressure water supply or working in conjunction with a rainwater changeover
device.
PTF peripheral turbine pumps are best suited to ‘flooded suction’ type applications as they
lack the ability to self-prime.
With the aim of getting you up and running smoothly all BiancoS2 pumps are supplied with a
pre-wired iCon nXt
electronic pressure controller which doesn’t require a licensed electrician
to install.
2. Key Features
•
Includes iCon nXt electronic pump controller for automatic pump starting, stopping and
restart after power loss and/or water loss
•
Pump control fitted and wired with plug and play leads so a licensed electrician is not
required during installation
•
Pump controller pre-set to start once the pressure falls below 2.2bar
•
Incorporates run-dry (low flow) protection to prevent pump damage
•
High quality mechanical shaft seal and high quality motor bearings
•
240V single phase TEFC motor with in-built auto reset thermal overload to prevent the
pump from overheating
