- 20 -
USE
INSTRUCTIONS FOR USE
Press key 14 (Fig. 2.19) to modify the function
status:
-
oFF
= timed manual heating function disa-
bled;
-
ch on
= timed manual heating function ac-
tive; once the programming phase
has been completed, the symbols
,
and
will flash;
-
ch oF
= timed manual heating function disa-
bled; once the programming phase
has been completed, the symbols
and
will flash;
The selected function will be displayed on the
bottom right of the LCD display Fig. 2.21.
Fig. 2.21
Press keys 11 or 12 (Fig. 2.19) to modify
the time interval governing the forced heat-
ing function from a minimum of one hour to a
maximum of 30 days.
In the instance where the duration is not modi-
fied with respect to
00-h,
a default time of 1
day will be applied Fig. 2.22.
Fig. 2.22
Press key 19 briefly to save the values en-
tered and upon leaving the menu, the display
will indicate
OK
to confirm (Fig. 2.23).
Fig. 2.23
To exit programming without making any mod-
ifications, press keys 17 and 18 (Fig. 2.19)
at the same time for 2 seconds or wait for 60
seconds.
N.B.: The following settings are also reset
along with the time bracket.
Deactivation/End of function:
The function will end when the time set pass-
es or when the function status is set to "
oFF
".
Hold down keys 17 and 18 (Fig. 2.19) at the
same time for 2 seconds until the remaining
time and the status of the function in progress
appears on the LCD display.
Press key 14 (Fig. 2.19) to modify the function
status when in "
oFF
".
Press key 19 briefly to save the values en-
tered and upon leaving the menu, the display
will indicate
OK
to confirm (Fig. 2.24).
Fig. 2.24
To exit programming without making any mod-
ifications, press keys 17 and 18 (Fig. 2.19)
at the same time for 2 seconds or wait for 60
seconds
Summary of Contents for Inovia 25C
Page 90: ...90 NOTES...
Page 91: ......
