Translation of the original assembly instructions
- 8 -
Health
Caution!
Vibrations can be transmitted
over the entire body, particularly
to the arms and hands. Very
strong or continuous exposure
to vibration can cause nerve and
blood vessel disorders!
Danger!
Risk of fatal injury by touching
live parts.
Do not carry out any work on
live parts.
Handling the BIAX handpiece
The assembly instructions are
intended
for
trained
expert
personnel!
Risk of entanglement!
While
performing
the
work
always wear well-fitting clothes!
Remove all jewellery before
starting work. Always wear a
hair net if you have long hair!
Risk of injury!
The tool must be held away from
the body when switched on!
Do not reach into a tool when it
is in operation!
Handle tools carefully!
Risk of explosion!
While grinding, dust can be
created which could form a
potentially
explosive
atmosphere.
Observe
the
regulations applicable in your
country
of
use
concerning
materials being processed.
The handpiece may only be operated when in a
perfect, fully-functioning condition.
The stipulated speeds of the handpieces must be
observed.
Choose sanding belt on the application.
Using sanding belts, ensure the permissible
circumferential speed is not exceeded to rule out
any risks of personal injury and property damage.
The workpiece may only be processed by the
sanding belt, never with other parts of the machine.
If a tool falls, it must be checked for any damage.
Check correct seating of the sanding belt.
Check correct seating of the shaft on the handpiece
because the power train could be damaged if they
are installed incorrectly!
Assembly
Disconnect
the
drive
machine from the mains
before starting any assembly
work!
Do not leave any wrenches in
the
unit!
Check
that
all
wrenches have been removed
before starting up.
Assembly of the handpiece
Square connection
Place the square (a) of the flexible shaft
on the square socket (b) of the handpiece.
The spring knob (c) of the shaft must lock
in the tool hand recess (d).
For disassembling, depress spring knob
(c) and remove handpiece.
Fig. 1 Assembly of the
square connection
