Spec
ifi
cat
i
on
Product name:
BIBOTING Healthcare Massager
Product model:
BB-333
Rated Voltage:
100V-240V or 12Vdc
Rated frequency:
50-60Hz
Power:
35W
Dimension:
Approx.270 (L) ×130 (W) ×180 (H) mm
Ner weight:
Approx.2.5kg
Origin:
Taiwan, China
Executive standard number:
GB4706.1-2005
Version:
V4.1
Operating Frequency Band:
2.4GHz 〜 2.48GHz unlicensed ISM band
Power:
7.5dBm (MAX)
Voltage:
1.8V-3.6V
1. Without permission, any company, firm or user shall not alter the
frequency, increase the power, or change the features and functions
of the original design of the certified low-power RF motors.
2. The use of low-power RF motors shall neither affect flight safety
nor interfere with legitimate communication. If interference is found,
it should be suspended immediately until interference is no longer
exists after improvement is made. Legitimate communication in
the preceding paragraph refers to radio communication operating
in accordance with the provisions of the Telecommunications Act.
Low-power RF motors must withstand interference from legitimate
communication or radiological, radiative electrical equipment for
industrial, scientific, and medical applications.
NOTE:
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radi-ate radio frequency energy and, if not in-stalled and used
in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
—Consult the dealer or an experienced radio/ TV technician for help.
Bluetooth system description
NCC Warning
13
For License-Exempt Radio Apparatus (RSS-GEN)
This device complies with Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation
of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radio exempts de licence. L'exploitation est
autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas
produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
14
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may
cause undesired operation.
