en-14
en
2
. . Installation
Warning:
w
Installation activities may only be performed
by technical staff qualified for this purpose.
Warning:
w
Before starting installation: read the safety
instructions.
See also:
"Safety instructions" on page 12
2.1
Inspection on delivery
• Check the unit and the packaging to ensure that they have
been delivered in good order. Notify the driver and the
supplier immediately if any shipping damage is detected.
• Ensure that all components are present. Notify supplier of
any missing parts immediately.
See also:
"Components and accessories" on page 11
2.2
Hanging the unit up
2.2.1 Determining the location of the unit
• Make sure that the structure from which the unit is about
to be suspended can bear at least 4 times the weight of the
unit. The unit’s weight is indicated on its type plate.
• The distance between the floor and the unit’s underside
must be more than 2.7 m.
• Make sure that the electronics and the pressure meters on
the unit’s long side remain easily accessible.
• Keep the underside of the unit accessible on account of
the inspection hatches.