M
ANUAL
FOR
NOZ2 G
AS
-
FIRED
I
NSTALLATION
Manual version 4.0 (06-12-2016)
en-13
en
2.1.2 Check before installation
Warning:
w
Check the following before unpacking the
unit. Install the unit only if all conditions have
been complied with.
• The unit must be suitable and have been adjusted for the
locally available gas supply (type of gas and gas pressure).
• The electrical connection data on the type plate must cor-
respond to the locally available electricity supply.
• All restrictions on use must have been complied with.
See also:
1.4.5 "Type plate" on page 7
1.6.4 "Type of gas" on page 9
1.6
"Restrictions on use" on page 8
2.2
General instructions
2.2.1 Sequence of operations
When installing the unit, stick to the following sequence of
operations:
1. Perform the checks in advance.
2. Install the unit and plug it in, in the order described.
3. Commission the unit and check the operation.
4. Enter the necessary settings.
2.2.2 Measures to be taken in the event of construc-
tion work
Intake of dust, cement, grit, etc., can damage the unit. As long
as such substances are present in the space:
• do not commission the unit;
• cover all inlet and discharge openings.
