en-28
en
3
. . Commissioning
3.1
About commissioning
The procedure for commissioning should be performed in the
following situations:
• once when the unit is commissioned after installation;
• each time after maintenance or servicing work has been
performed on the unit;
• each time the unit is recommissioned after it has not been
used for extended periods of time.
The procedure – including all checks – must be performed
fully and in the described sequence.
Before starting, be sure to familiarise yourself with the cor-
rect operation and functioning of the unit.
3.1.1 Safety instructions
Warning:
w
The unit may only be commissioned by
technically qualified personnel.
Warning:
w
Before you begin: read the safety instructions.
See also:
1.7.1 "Safety issues relating to installation, maintenance and ser-
