Installation & Trial Operation
How to Use
3
1. Remove the seat from
existing toilet body.
Release the nuts, and then remove
the seat and cover from it. Keep the
removed seat, cover and nuts in a
proper place in case you need to use
them again. Turn off the water.
Nozzle position is adjustable. (5 levels)
2. Remove the water hose
and then install T-valve.
Install T-valve
Water supply hose.
It’s okay to use
Teflon tape or similar
sealing compounds
for a better seal.
Top mount metal bolt
Washer
Bracket Holder
Catch Plate
Top Mount Rubber Nut
Align
3. Fix the bracket onto the
toilet first.
Adjust the seat and the front part of
toilet back and forth so that they
correspond before fastening the nuts.
4. Push the main body
toward the bracket
completely.
Push it back until you hear a click.
When the product is not installed
well, the seat may come apart.
5. After installing the
T-valve, connect the
bidet. Connect the hose
to the bidet body and
turn on the water.
T-valve
Bidet Water
Supply hose
Seat sensor
6. Turn on the water and
check for leaks.
7. Be sure that the nozzle
comes out and retracts
when powered on.
Don’t plug the power cord in with wet
hands. Risk of electric shock.
7. Remove the adhesive
protection to attach the
remote control bracket
to the wall or other
surface.
Clean the area thoroughly before
attaching the bracket.
8. Insert two “AA” type
batteries (included) as
indicated inside battery
compartment.
Identify a location in the bathroom for
the remote control that is visible and
reachable from the toilet.
1. Sit on the toilet seat
Be sure to sit on the seat sensor. If the
sensor is not occupied, all functions
will not operate.
2. Wash, Bidet, Power Wash
Selected function can be used as
described. When pressing the
selected function again, nozzle will
move back and forth to wash a
wider range. Press the button
once again to stop Massage
function. Specialized water spray
when in the Power Wash mode
helps relieve constipation and
fecal stasis.
3. Dry temperature control
Dryer operates for 3 minutes. Dryer
temperature is adjustable by pressing
power ctrl buttons. (5 levels)
4. Pulse
When pressing the Pulse button
during the operation of Wash,
Bidet, and Power wash, water
pressure will repeat high and low
for smooth pulsating wash. Pulse
function will not operate during
the operation of Sitz bath.
*See how to use section 5-13 for
Sitz bath.
5. Nozzle position control
