57
SCARPAVAPOR
®
PLUS
ENGLISH
operate the dryer, set the green switch on the machine on position “WARM AIR” and turn
the timer according to the desired drying time.
»
The suggested drying time, per item, shoe model and material, is written on the panel ma
-
chine that you can find opening the door on the right.
OZONE
»
The machine is equipped with an ozone generator to kill bateria and eliminate the
bad smell. To operate the ozone function, set the green switch on the machine on po
-
sition “OZONE” and turn the timer according the desired time (at least 30 minutes).
N.B.: be sure the door of the drying/ozone compartment is always closed during its use.
»
You can use the ozone function even when the machine is off (with the main switch on
position “0”). The ozone is generated by a 12 volts lamp device (lamp average lasting life is
5000 hours) that does not need to be recharged, so its use is costless.
SCARPAVAPOR DETERGENT (G)
»
Fill in the provided bottle (G), lcated on the machine shelf, with the detergent, insert the
loading hose coming from the upper side of the machine, into the bottle.
»
It is injected through the steam/detergent gun pressing its white button
N.B.: before spraying any detergent or foam, we recommed to ste
-
am brush the surface that needs to be cleaned. In this way the fabric / le
-
ather becomes softer and the detergent can filter deeper into its fibers.
DETERGENT FOAM BRUSH (OPTIONAL CON SPEEDY FOAM
)
»
It delivers detergent foam to soften the superficial dirt.
»
To make the foam work more deeply, it is advisable to steam it in order to open the pore o
soften the fiber of the fabric first, then deliver the foam und rub it gently.
»
When delivering the foam, make sure that the air compressor (any type) is connected to
the machine inlet, that the “detergent foam” is present in the right bottle (letter E) and the
recharging hose is immersed into the product.
»
It is possible to regulate the intensity of the foam by adjusting the two settings (air regula
-
tion and product regulation) on the machine panel. To get the right foam, it is advisable to
position the two settings almost to the minimum.
PRETREATING DETERGENT (L)
»
It can be applied using a spraying bottle or microfiber cloth, directly on the shoe. It is sug
-
gested to remove the most stubborn stains.
»
For a better performance, let it act for at least 2 minutes before rinsing.
»
DETERGENT FOR UPHOLSTERY (M)
»
It can be applied using a spraying bottle, directly on the surface that needs to be cleaned.
It’s more aggressive than the pretreating detergent.
»
Use it carefully, bilute with water 1:50 to clean delicate fabrics and leather.
Using ScarpaVapor
®
Plus you can treat all sorts of materials, shoes bags, sport boots, helmets
gloves, motorbike jackets are made of.
Here below some examples:
