WWW.BIGASSFANS.COM © 2017 DELTA T LLC ALL RIGHTS RESERVED.
6
Note: Secure cord retainer to plug before attaching
controller to motor cable.
Adjust Speed and Timer
To adjust fan speed,
press the
and
buttons on
the Speed panel.
To adjust timer settings,
press the
and
buttons
on the Hours panel.
To set the maximum fan speed,
select your preferred
speed, and then press and hold the Speed and
buttons simultaneously for three seconds. LED
indicators will blink, indicating new maximum speed.
Cancel, Reset, and Lock Timer
To cancel the timer,
press Hours
button until all LEDs
turn off.
To reset the timer
after the programmed time period
has elapsed and the fan is off, press power button. The
timer will restart from the last saved setting.
To lock the timer,
press and hold Hours and buttons
simultaneously for three seconds. LED indicators will
blink to indicate that timer is locked. Unlock timer by
pressing Hours and buttons again.
Factory Reset
To reset controller to its factory settings, press and hold
the Hours and Speed buttons, and then power cycle
the controller. The Speed LED indicators will count up
from 1 to 11 when reset is complete.
Note: In the event of a power cycle, the controller will
retain its most recent speed and timer settings.
Speed Setting
RPM
1
350
2
445
3
540
4
635
5
730
6
825
7
920
8
1015
9
1110
10
1205
11
1300
SPEED AND TIMER CONTROLLER
Extension Cord
(optional)
Summary of Contents for AirEye Series
Page 31: ......
