Step 7: Dormer Assembly
A:
Attach 1 Dormer Roof Set Right to 1 Dormer Roof Set Left with 1 Wall Angle Bracket with the hardware
provided at the inside peak as shown in (fig. 7.1 and 7. 2).
B:
Attach 1 (B10) Dormer Side to the inside edge of each Dormer Roof using 2 (S1) #8 x 1-1/8” Wood Screws
per board. (fig. 7.3)
E:
Place 1 (B12) Dormer Side Burst on each side of the (B11) Dormer Centre so they are tight to the sides and
flush to the bottom of (B13) Dormer Bottom and then attach to each (B10) Dormer Side with 1 (S1) #8 x 1-1/8”
Wood Screw per board. (fig. 7.5)
F:
On the outside of the Dormer Assembly and centred on the (B13) Dormer Bottom, attach 1 (C8)
Dormer Burst to each (B12) Dormer Side Burst and to (B11) Dormer Centre from the inside of the assembly using
3 (S1) #8 x 1-1/8” Wood Scews. (fig. 7.5 & 7.6)
C:
Attach 1 (B13) Dormer Bottom to the Dormer Assembly with 2 (S1) #8 x 1-1/8” Wood Screws, making sure the
top of (B13) is tight to the bottom of each (B10) Dormer Side. (fig. 7.4)
D
: Attach 1 (B11) Dormer Centre, centred and flush to the bottom of (B13) Dormer Bottom with 1 (S1) #8 x 1-1/8”
Wood Screw and to the tops of both (B10) Dormer Sides with 2 (S1) #8 x 1-1/8” Wood Screws. (fig. 7.4)
Fig. 7.1
Fig. 7.2
Fig. 7.4
Fig. 7.3
Fig. 7.5
S1
B10
B10
Wall angle bracket
with Hardware
Dormer Roof
Set - Right
Dormer Roof
Set - Left
S1
B12
B10
B12
B11
B11
B13
S1
B13
2 x
Dormer Side 1 x 3 x 13-5/8”
1 x
Dormer Centre 1 x 3 x 10-3/4”
2 x
Dormer Side Burst 1 x 3 x 6-3/4”
1 x
Dormer Bottom 1 x 2 x 22”
1 x
Dormer Burst 1 x 4 x 5-1/2”
B10
B11
Hardware
Wood Parts
14 x
#8 x 1-1/8” Wood Screw
S1
1 x Wall Angle Bracket
1 x Dormer Roof Set Left
1 x Dormer Roof Set Right
Other Parts
B12
B13
C8
Fig. 7.6
C8
B10
B10
B10
20
Summary of Contents for F23100
