2"
6"
6"
8"
8"
8"
2"
8"
Fig. 23.2
C13
B9
C19
S2
C15
C19
S5
S5
B:
Loosen bolts in (C18) Top Front Back, tuck in the Window Mesh and then retighten bolts. (fig. 23.2)
C:
On the outside of the assembly, tight to the top of (B9) Siding, attach 1 (C19) Window Sill to (C13) Post and
(C15) Mid Post with 4 (S2) #8 x 1-1/2” Wood Screws. Make sure the mesh is taut. (fig. 23.2)
D:
From the outside of the assembly attach Window Mesh to (C13) Post and (C15) Mid Post using 2 (S5) #8 x
1/2” Pan Screw (with #8 flat washer) per post. The top screws should be 2” from the bottom of (C18) Top Back
Front and the bottom screws should be 2” from the top of (C19) Window Sill. (fig. 23.2)
E:
Attach the bottoms of Window Mesh to each (C19) Window Sill from the inside of the assembly with 3 (S5) #8
x 1/2” Pan Screws (with #8 flat washer) per board. The screws should measure 6” from both the (C15) Mid Post
and (C13) Post. The middle screw should be in the centre. Make sure the mesh is taut. (fig. 23.2)
Step 23: Attach Window Mesh and Window Sill cont.
These directions are for both the front and back of the assembly.
Hardware
8 x
#8 x 1-1/2” Wood Screws
14 x
#8 x 1/2” Pan Screws (#8 flat washers)
S2
S5
2 x
Window Sill 1 x 4 x 42-5/8”
Wood Parts
C19
38
C15
C13
C18
2”
2”
Summary of Contents for F23100
