5.0
Operation
5.1
1
Re-Picking a
Complete Tower
Continued.
Fig. 49
Fig. 50
Fig. 51
Fig. 52
Fig.
53
Eye
Ratchet Strap, Rope or Chain
Rear Clamps
7.
Hold the 'RED' button and pull the joystick back to close
the 'Rear Clamps'
(
Fig. 49
)
. E
nsure that the rear clamp
'Paddles' has gripped under the bales tight.
8.
Whilst still holding the 'RED' button, push the joystick left
to 'Retract Turntable' (
Fig. 50
). Ensure you tightly squeeze
the top bales with the turntable. This will squeeze all the
layer of bales between the 'Rear Clamps' and the
'Turntable'.
WARNING:
Do NOT Retract Turntable unless the Turntable
is at 90 degrees. This could causes damage to the machine.
9.
Holding the 'RED' button push the joystick right (
Fig.
51
)
to
insert the hooks into the top layer of the stack. This will
help
pull the top layer over with the Transtacker 'Platform'.
10.
Push the joystick forward to start to bring the bed down
(
Fig. 52
).
CAUTION:
The security of the load is dependent upon the
maintenance of hydraulic pressure in the clamp cylinders.
On long journeys, particularly with older machines, it is
advisable to secure the rear clamp with a suitable ratchet
strap, rope or chains threaded through
the eyes provided
(Fig
. 53
).
16
Summary of Contents for Transtacker 4100
