35
8.
Hold down the bottom right button and move joystick back to close the rear clamps (Figure
51).
a.
Be aware that if the trailer is over vertical, the rear clamps will get full of soil and will
not be able to clamp the bales as intended.
Figure 52: Tip Bed Down
9.
Push the joystick forward all the way until the platform is resting on the Stops (Figure 52).
10.
Enter
‘
Road Mode
’
to ensure safety of load before travelling down the road.
a.
NOTE
:
It is the operator’s responsibility to ensure
the load is secure before travelling
on the highway and ensuring the bales are securely in the rear clamps as advised.
Summary of Contents for Transtacker
