34
Figure 48: Raise Stack Table
5.
Hold down the bottom right button and move the joystick forward to raise the Turntable to
be perpendicular to the Platform (Figure 48).
a.
NOTE:
The Turntable
must be
parallel to the bales (fully raised)
before
retracting
the Turntable onto the top of the stack, as this could cause damage to the Turntable.
Figure 49: Retract Stack Table
6.
Continue to hold down the bottom right button and move the joystick left to retract the
turntable onto the top of the stack (Figure 49).
Figure 50: Insert Hooks
7.
Hold down the bottom right button and push the joystick right to insert the hooks into the
bales (Figure 50).
Figure 51: Close Rear Clamps
Summary of Contents for Transtacker
