BIG BEN CYBERBIKE, User Instructions

EN

G

LI

SH

07

It is also possible to reprogramme these forward and reverse pedalling actions 

(see paragraph 4.a).

4.c.II. Cyberbike™ mode

In Cyberbike™ mode, FORWARD pedalling has the same positive values as the 

Y (vertical) direction of the C-Stick on a Gamecube™ controller. The faster you 

pedal, the greater the value.

In Cyberbike™ mode, REVERSE pedalling has the same negative values as the 

Y (vertical) direction of the C-Stick on a Gamecube™ controller. The faster you 

pedal, the greater the negative value.

It is also possible to reprogram these forward and reverse pedalling actions 

(see paragraph 4.a).

5. DIAGNOSING ERRORS

The vehicle/character fails to move on the screen when you are pedalling on the 

Cyberbike™.

- Check that all cables are properly connected (See p: 5 - 2a - Fig 6).

- Check that the Gamecube™ / Cyberbike™ mode switch is in the desired mode, 

it needs to be set to the CB position (See p: 6 - 4c - Fig 11). 

The vehicle/character fails to respond when you apply the Cyberbike™ brake.

- Check that all cables are properly connected (See p: 5 - 2a - Fig 6).

- Check that the Gamecube™ / Cyberbike™ mode switch is in the desired mode.

- Ensure that the brake control has not been accidentally reprogrammed. 

To cancel all programming and reset to default (See p: 6 - 4c - Fig 11). 

The vehicle/character turns, although the handlebars are centred.

- Cancel all programming (See p: 6 - 4a III).

- Restore manufacturer’s calibration (See p: 6 - 4b).

The game fails to respond to your Cyberbike™ signals

 (See Annexe 1 - p: 24)

.

- Check that all cables are properly connected (See p: 5 - 2a - Fig 6).

-  Check that the Cyberbike™ Gamecube connector is properly connected to the 

Port 1 controller connector.

The Cyberbike™ is not recognised by the console.

- Ensure that the cable inside the handlebar support is connected 

(See p: 5 - 2a - Fig 6).

- Ensure that the cable from the Cyberbike™ is connected to the Wii™console. 

It has to be connected to port 1 on the GameCube™ connectors. It will not func-

tion in any other connectors (See p: 5 - 2a - Fig 6).

- Ensure that you have not selected the Wii™ and Nunchuk™ controller option 

during set up. You need to select the GameCube™ controller option. If you have 

selected the Wii™ controller option, select the options and select the «Choise of 

controller» option. You can then select the GameCube™ option.

6.WARNING

1.  Read the enclosed instructions carefully before using the product. The product 

should only be used as described in these instructions. Keep these instructions in 

a safe place.

2.  This equipment complies with European standards governing fitness equipment 

for non therapeutic, home use.

3.  This equipment should be assembled by an adult. Care should always be taken 

when assembling and disassembling the Cyberbike™.

4.  All small parts and plastic bags should be kept out of reach of children. Ensure 

that plastic bags are disposed of appropriately.

5.  The equipment owner must ensure that anyone using this product has been infor-

med of all safety measures. Children should be given adequate instructions by an 

adult on how to use the equipment. Children should always use the equipment 

under adult supervision.

6.  Help your child to adjust the handlebar and seat to the correct height.

7.  Delta Reference / Bigben Interactive accept no responsibility for any injury or 

damage inflicted on any person or any property as a result of improper use of the 

product by the purchaser or a third party.

8.  Not suitable for children or adults weighing more than 130kg/286lbs.

9.  This product is designed for home use only. This product should not be used for 

any public, commercial or rental purposes.

10.  This product should be used and stored indoors, in a dry, dust-free place, on a 

firm, flat surface with ample room for manoeuvre. Ensure that you have adequate 

room to access and move around your Cyberbike™ safely. If necessary, a mat 

can be placed underneath the Cyberbike™ to protect the floor. Keep all liquids 

well away from the equipment to avoid the risk of fire or electrocution.

11.  The user is responsible for maintaining the Cyberbike™ in good condition. After 

assembly and before each use, check that all parts and fixings are properly se-

cure with no protruding elements. You should regularly check parts and fixings for 

signs of wear. 

12.  The equipment should be protected from bumps and knocks, which could da-

mage your equipment or cause it to malfunction.

13.  Should your Cyberbike™ become damaged, stop using the equipment and 

contact technical support. See paragraph 7.

14.  Never use the Cyberbike™ near stairs, a steep slope, a road, a swimming pool or 

water.

15.  Shoes should always be worn during use to protect your feet. Avoid wearing bag-

gy, loose fitting clothing that may become caught up in the equipment. Remove 

all jewellery before using the equipment.

16.  Warning: the flashing LEDs and lights could induce an epileptic fit or loss of 

consciousness in a susceptible person. This effect could also be caused by wat-

ching the TV or playing certain games. Those never having previously suffered 

from epilepsy may also be at risk. If you or any member of your family has suffered 

from similar symptoms to epilepsy in the past, such as a fit or loss of consciousness 

when exposed to flashing lights, we would advise you to consult a doctor before 

using the Cyberbike™. We advise parents to supervise any children using the Cy-

berbike™. Should either you or your child display any of the following symptoms 

FR

A

N

C

A

IS

ES

PA

Ñ

O

L