Big Button BB20, Owner'S Manual

10

11

  Code Identi



 cation Feature

The Code Identi

fi

 cation Feature allows you to 

identify the 4 digit library code stored under 
your device key. For example, if you want to 

fi

 nd out what 4 digit code is stored under your 

TV device key, follow the six steps below:

1.  Press and hold both the 

MUTE

 and 

POWER 

buttons at the same time until the 

green indicator under a mode button stays 
on, then release the

buttons.

2.  Press and release the desired mode button 

(

TV

 or

 SAT/CBL

). The green indicator for 

that mode blinks, then stays lit.  

3.  Press and hold both the 

MUTE

 and 

POWER 

buttons at the same time for 1 

second, then release the

buttons. The green 

indicator blinks off.

4.  To 

fi

 nd the 

fi

 rst digit for the code stored 

under the mode key pressed in step 2, press 
each numeric key from 

0-9

 in turn. When 

the green indicator blinks off the number 
you pressed is the 

fi

 rst digit for the code 

you are searching for.

5.  To 

fi

 nd the second digit, repeat step 4, this 

time when the green indicator blinks off this 
is the second digit.

6.  Repeat step 4 to 

fi

 nd the third and fourth 

digits.

Programming Combo Device Codes

Some Combo devices (e.g. TV/VCR, TV/DVD, 
DVD/VCR, etc.) will require you to set up two 
different Mode buttons to control both parts of the 
Combo device. For example, if you have a TV/
DVD Combo, you might need to set up one code 
under the 

TV 

button to control the TV part AND 

a separate code (under any other Mode button) to 
control the DVD part.

Volume/Mute Control and Punch-Through 
Feature

This remote lets you select which device Mode 
controls your Volume/Mute buttons. 

Any Mode chosen for Volume/Mute control 
MUST have its own Volume/Mute function or 
the Volume/Mute buttons will do nothing.

Setting ALL Volume/Mute Control to any one 
Mode

This routine can set all Modes to “punch-through” 
to any one chosen Mode for Volume/Mute button 
control without the needing to change to that 
Mode.

1.  Press and hold both the 

MUTE

 and 

POWER 

buttons at the same time until the green 
indicator under a mode button stays on, then 
release the

buttons.

2.  Press and hold the 

MUTE

 button until the 

green indicator blinks off, then release the 
button.

3.  Press and release the desired Mode button (

TV

or

 SAT/CBL

) for Volume/Mute control, the 

green indicator for that mode blinks then stays 
on.

  Setup, cont.