background image

13

NEMA 5-15 (three-prong grounded) outlet 
only. Do not force the plug into an outlet that 
is not designed to accept it. Never dismantle 
the plug or to alter the power cord, and do 
not attempt to defeat the grounding feature 
by using a 3-to-2 prong adapter. If you have 
questions about grounding, consult your local 
power company or a qualified electrician. 
This PDU requires a properly grounded outlet
for safety. If you’re not sure if your home’s 
electrical wiring is properly grounded, have it 
checked by a qualified electrician. If a rooftop 
device such as a satellite dish connects to the 
PDU, ensure that the device’s wires are also 
properly grounded. 

Liquid: avoiding electrical shocks 

Do not operate the PDU if liquid of any kind is 
spilled onto or inside the unit. Do not operate
it near rain or water, even water that is 
contained (for example, bathtub or sink). 

Power cord safety 

Do not place the power cord near areas with 
heavy foot traffic (for example, hallways). Do 
not create a trip hazard with the power cord. 
If the power cord’s protective jacket rips or 
frays, exposing the internal wiring or shielding, 
disconnect it from the power source and replace 
the power cord immediately. See the warranty 
section of the owner’s manual for details. 

No User-Serviceable Parts Inside 

If the PDU is not operating properly, do not 
remove any part of the unit (cover, etc.) 
for repair. Unplug the unit and consult the 
warranty section of the owner’s manual.

FCC Warning 

WARNING!! Changes or modifications to this
unit not expressly approved by the party 
responsible for compliance could void the 
user’s authority to operate the equipment. 
This equipment has been tested and found 
to comply with the limits for a Class B Digital 
Device, pursuant to Part 15 of the FCC 
Rules. These limits are designed to provide 
reasonable protection against harmful 
interference in residential installation. This 
equipment generates, uses and can radiate 
radio frequency energy and, if not installed 
and used in accordance with the instruction 
manual, may cause harmful interference 
to radio communications. However, there 
is no guarantee that interference will not 
occur in a particular installation. If this 
equipment does cause harmful interference 
to radio or television reception, which can 
be determined by turning the equipment 
off and on, the user is encouraged to try to 
correct the interference by one or more of 
the following measures: 

Summary of Contents for PR-R13PI

















Reviews: