8
LED Indicators
“G” or Ground
ON:
PDU is grounded properly
OFF:
PDU is not grounded
“P” or Power
BLUE:
Good / Protected and Clean power
RED:
Bad / No Protection
“N” or Network
BLINKING RED:
No Network Connection
SOLID BLUE:
Good Network Connection
RAPID BLINKING RED:
PDU failure requires reboot or reset
Outlet Status
ON:
Outlet is On
OFF:
Outlet is Off
Voltage
SOLID BLUE:
Normal / Good Voltage
SOLID RED:
Over / Under Voltage
Always On
ON:
Outlet is On
OFF:
Outlet is Off
Surge Module
S1 and S2 LED
ON:
Good / Protected
OFF:
Bad / Not Protected