119575
Instant Read Thermometer
Note:
When this product is in or near a high radio-frequency electromagnetic field, the display could be distorted.
In order to avoid any distortion, leave the affected area and the unit will be restored to normal operating
conditions.
Specifications
Measurement range
-40°F to 572°F (-40°C to 300°C)
Measurement accuracy
±1.8
o
F/ ±1
o
C
Safety instructions
Do not leave unattended or within reach of children
Do not immerse into water or other liquids. Should it get wet, wipe off immediately.
Do not expose to open fire or extremely high temperatures.
Battery installation
Loosen the screws on the battery cover on the back; remove battery cover.
Install two 1.5V AAA batteries and make sure that the + and the – poles are positioned correctly.
Replace the battery cover; tighten the screws on the battery cover
Operating instructions
Power ON/OFF – Open probe to turn on; close probe to turn off.
Auto power off after 3 minutes (function is disabled at 104°F or above).
Press and hold the °F/°C button on the back for at least 3 seconds to toggle temperature unit settings
Clean the exterior of the thermometer by wiping it with a damp cloth.
When not in use for an extended period, remove the batteries and store in a dry, dust-free environment.
______________________________________________________________________
Thermomètre à lecture directe
Caractéristiques techniques
Plage de mesure
-40°C à 300°C (-40°F à 572°F)
Précision
±1
o
C/ ±1.8
o
F
Consignes de sécurité
Ne pas laisser sans surveillance et garder hors de portée des enfants
Ne pas immerger dans l’eau ou un autre liquide. S’il est mouillé, l’essuyer immédiatement.
Ne pas exposer à une flamme ou à des températures extrêmement élevées.
