Copyright 2017 Big John Grills & Rotisseries
8
This unit ships 90% assembled and we make sure the instructions for the rest are easy to follow and
perform. Please follow the instructions below to ensure your griddle is properly assembled for safe op-
eration. Please remember this is a commercial piece of equipment and therefore the materials used to
build it are of the best quality
1. Your Gas Griddle is shipped upside down for protection.
2. Unbox the unit and, while upside down, attach the wheels.
A. Attaching the 8” Wheels:
i. Adjust nut to have a 1/4” clearance between the wheel bearing and the nut
ii. Thread wheel assembly into lower threaded hole and lock nut against frame
B. Attaching the 4” Caster Wheels
i. Locate coupler on opposite side of cart.
ii. Screw threaded stem of caster into coupler
iii. Tighten using thin wrench of caster wrench purchased from Big John Grills
3. Remove all packing materials, tape, protective laser paper (can be white, gray, or clear in color) from
stainless, and plastic coverings.
4. Bolt drip pan holders to each side of the frame.
5. Place 1/6 size stainless steel drip trays into holders and check that they are level.
ASSEMBLY INSTRUCTIONS
