8
OPERATION
TRANSPORT
Moving and Stopping
NOTE:
The truck should only be operated
on a level surface.
1.
Turn on the key switch and check that
the electric capacity is enough. If low,
recharge the battery
2.
Check that the load is in the down posi-
tion before traveling.
3.
Release the floor lock.
4.
Apply pressure to the steering handle
and mast handles to move the truck for-
ward. Pull evenly on the steering han-
dle to move the truck backward.
5.
To stop the lift truck, hand restraint
against the steering handle and mast
handles is usually adequate.
6.
After the lift truck has stopped, always
engage the floor lock before lifting or
lowering and when parking.
7.
Turn off the key switch to prevent bat-
tery drain and to prolong the service
life.
M22 Lift Truck
R6733
