8
DIAGRAM #4
REQUIRED HARDWARE IN THIS STEP
NO
1
2
3
6
FLAT WASHER
7 PCS
SKETCH
QTY
DESCRIPTION
SPRING WASHER
BOLT
7 PCS
3 PCS
OPEN WRENCH
1 PC
5
BOLT
4 PCS
7
4 PCS
WOOD SCREW
BAR TOOL ASSEMBLY INTRUCTIONS
2. Attach Seat Frame (D) to Chair Back (C) using 3 Bolts (3), 4 Bolts (5), 7 Spring
Washers (2) and 7 Flat Washers (1) as shown. Do not fully tighten bolts. Insert the end of
Left Stretcher (H into the holes in Left Front Leg (E) and Chair Back (C). Secure using 2
Wood Screw (7). Fully tighten screws. Insert the end of Right Stretcher (G) into the holes
in Right Front Leg (F) and Chair Back (C). Secure using 2 Wood Screw (7). Fully tighten
screws.
3. With assistance, carefully turn the assembled chair upright. Make sure the assembled
chair is level and square tighten all bolts (3 & 5) with Open Wrench ( 6)
