3
GENERAL SAFETY RULES
JACK USE AND CARE
INSPECTION
GENERAL SAFETY RULES
IMPORTANT SAFETY CONSIDERATIONS
WARNING: Read and understand all instructions.
Failure to follow all instructions listed below may
result in serious injury.
WARNING: The warnings, cautions, and instructions discussed in this instruction manual cannot
cover all possible conditions or situations that could occur.
It must be understood by the operator
that common sense and caution are factors that cannot be built into this product, but must be supplied by
the operator.
CAUTION: Do not allow persons to operate or assemble this jack until they have read this manual
and have developed a thorough understanding of how the jack works.
DO NOT OPERATE OR REPAIR THIS EQUIPMENT WITHOUT READING THIS MANUAL.
To maintain the Jack and user safety, the responsibility of the owner is to read and follow these instructions.
• Inspect the jack for proper operation and function.
• Keep instructions readily available for equipment operators.
• Make certain all equipment operators are properly trained; understand how to safely and correctly operate
the unit.
• Allow unit operation only with all parts in place and operating properly.
• Use only genuine replacement parts.
• Service and maintain the unit only with authorized or approved replacement parts; negligence will make the
jack unsafe for use and void the warranty.
• Carefully inspect the unit on a regular basis and perform all maintenance as required.
• Keep all decals on the unit clean and visible.
• Inspect the jack carefully before each use. Ensure the jack is not damaged, excessively worn, or missing
parts.
• Do not use the jack unless it is properly lubricated.
• Using a jack that is not in good clean working condition or properly lubricated may cause serious injury.
• Inspect the work area before each use. Make sure it is free and clear of any potential hazards.
•
Do not modify the jack in any way
. Unauthorized modification may impair the function and/or safety and
could affect the life of the equipment. There are specific applications for which the
jack
was designed.
•
Always check for damaged or worn out parts before using the jack
. Broken parts will affect the jack
operation. Replace or repair damaged or worn parts immediately.
•
Store idle jack
. When
jack
is not in use, store it in a secure place out of the reach of children. Inspect it for
good working condition prior to storage and before re-use.
•
Inspect work area
. Ensure work area is free and clear of any hazards before operating jack.
•
Keep children away
. Ensure that all children are at a safe distance when operating jack.
•
Not for use by children, people with reduced mental capacity, or people under the influence of drugs
and alcohol.
