10
TO ADD JACK OIL
TO REPLACE JACK OIL
1. Position the jack on level ground and lower the
saddle.
1. Position the jack on level ground and lower the
saddle.
2. Open release valve by turning handle counter-
clockwise (4 full turns).
2. Remove the oil plug.
3. Fill the oil case until oil level is just beneath the
lower rim of the oil fill hole.
4. Replace oil plug.
5. Perform the System Air Purge Procedure.
*SEE ASSEMBLY IMAGE FOR JACK OIL
RESEVOIR LOCATION.
Summary of Contents for T90203B
Page 12: ...12 ASSEMBLY DIAGRAM...
Page 27: ...27 SCH MA DE MONTAGE...
Page 42: ...42 DIAGRAMA DE ENSAMBLAJE...
