11
TO ADD JACK OIL
TO REPLACE JACK OIL
2. Open release valve by turning handle counter-
clockwise.
3. Remove cover plate. Remove the oil plug.
4. Turn the jack on its side to drain old oil from the
oil fill hole.
1. Position the jack on level ground and lower the
saddle.
1. Position the jack on level ground and lower the
saddle.
3. Fill the oil case until oil level is just beneath the
lower rim of the oil fill hole.
2. Remove cover plate. Remove the oil plug.
4. Replace oil plug.Perform the Air Purge Procedure
and Replace coverplate.
Oil Plug
Oil Plug
Oil Plug
Cover Plate
Cover Plate
Cover Plate
